Resin 3D printer

From emboxit
Jump to: navigation, search

Resolution

search for: 

 Taking resolution to the next level; the iBox Nano has almost 3x times the Z resolution of the next best 3D Printer.  

resolution table



RESIN

MAKERJUICE

FUN TO DO

The Castable Blend has been designed to cast your pieces in 
bronze, copper, tin or iron using standard vacuum investment casting methods and settings. 
It is an Ideal resin for casting pieces of art, Toy models, machine parts. 
The fully cured resin has a hardness of 73 shore D.
Available in Red only.
Recommended retail price €65,- p/kg.

Our Standard Blend resin is a real multi purpose resin, most cost effective for printing your day to day objects. 
The fully cured resin has a hardness of 35 shore D.
​Available in Red, Black and unpigmented.
Recommended retail price €45,- p/kg.

The Industrial Blend resin has been developed especially for some industrial clients who were in need for a resin that is extra hard 
and would maintain its structural integrity while exposed to very Low and High temperatures.
Because of these properties it is one of the few resins perfectly suitable for vulcanisation. 
For relatively low temperature metals like pewter or tin you can also use the Industrial Blend 
to print your moulds and cast straight from the printed mould. Read all about it in this Instructable
​The hardness of the fully cured resin is 75 shore D.
It has been tested from -45C to +225C.
​Available in Red, Black and unpigmented.
Recommended retail price €55,- p/kg.




Creation Workshop Software



Chimera



Solidray

Best value for money for introduction to DIY DLP 3D printing, even with buying the Projector from kitprinter3D the bunndle is still the bestOpinion: Nikos:24.02.2016 

 50 microns on the X and the Y axes, and 40 microns on the Z axis

Up to 0.04mm (40 micron) XY and 0.01 mm (10 micron) Z resolution

Creation Workshop software.
Up to 0.04mm (40 micron) XY and 0.01 mm (10 micron) Z resolution. 
    These are maximum values; ultimate resolution depends on DLP projector and the characteristics of the resin.
Printing volume: 85 x 60 x 170mm
Two color options: white or black.
Two system options, Flex Vat or petri+PDMS.



Stalactite 3D

Laser 3D printers are limited by the use of the laser beam, which has a typical diameter of 300 microns. 
With DLP we can reach feature details of 50 microns, which is a six-fold improvement.


FORM LABS

resolution 300μm

check laser spot size to conclude resolution 

Laser Spot Size 140 microns



XYZprinting

X/Y Axis Resolution: 0.3mm (300Microns)



UNCIA3D

Resolution 100 micron

Size of Uncia(mm) 700*200*350mm
Net weight 20KG
TechnologyDLP
Build Vol.(mm) 102*77*170
Molding material UV resin
Resolution 100 micron
OS Windows
Connection USB
software Creation Workshop
Printing software Snapshot 2.01



LITTLERP




iBOX

Resolution 328μm

IBOX NANO $299.99

iBOX MACRO youtube iBOX MACRO in 3ders.org 

iBOX MACRO
Resolution X-Y: 313 Microns
Resolution Z: 1.92 - 300 Microns
Build Area: 40 x 20 x 90mm (1.57” x 0.79 x 3.54”)
Size: 85 x 110 x 235mm (3.4x4.3x9.25”)
Weight: 1.1 kg (2 Lbs 7 Oz)
Power Consumption - Printing: 1.7 Watts (350mA @ 5v)
Power Consumption - Idle: 0.8 Watts (160mA @ 5v)
Connectivity: WiFi
Printer Software: Browser Based
Material: Resin [Supports Makerjuice G+]




DIY





1,6-hexanediol diacrylate

Two chess rooks are created using 3D printing. 
Light supplied by a computer projector creates free radicals which induce 
polymerization of 1,6-hexanediol diacrylate. 
After each layer is polymerized, the elevator is slightly lowered and the process is repeated. 
A dye is included to prevent light from penentrating much below the surface of the solution.




Comparison articles




Micro SLA

UNIRAPID III JAPAN

7μm @90000 USD

The resin material can be used in this SLS machine is ProtoGen 18420 from DSM, a liquid, ABS-like, photopolymer that produces accurate parts. 
In addition it can also use NanoTool from DSM to produce strong, stiff, high temperature resistant composite parts.

$90000 is still expensive, 7 microns is similar to DLP resolution, so similar results could probably be obtained using DLP without magnificationOpinion: Nikos:24.02.2016



Project 1200



Solus DLP

 The maximum XY build area is 145 mm x 110 mm and the maximum height is 80mm.
 XY resolution @ 25 microns = 48 x 27 x 80mm build area
 XY resolution @ 41 microns = 80 x 45 x 80mm build area

Most DLP printers use either a PDMS silicon layer or adhesive Teflon film for their resin tray. 
PDMS gets cloudy or can break after just a few prints & adhesive-backed Teflon scatters light, 
causing washed-out details, or worse still, the Teflon can separate from the bottom of the resin tray causing print failure. 
To solve these issues Solus uses a durable film sourced from the semiconductor industry combined with patent-pending technology. 
This allow for sharper details, smooth surface finish, & features smaller than 0.1 mm (100 microns) – perfectly suited to the demands of the jewelry industry.




MiiCraft

MiiCraft+, SLA-based DLP pico 3D printer, offers the resolution as high as 30 microns by Z-axis and 56 microns by XY-plane 
...jewelry, teeth,and microfludics within a short time.




ShareBot

up to 100x50x100mm in size. 
The projector uses 3000 ANSI lumens to produce objects with resolution 
as fine as 50 microns on the XY axis and 25 on the Z axis, all at about 170 cm cube per hour.




TI TIDA-00293




Thingiverse




SeemeeCNC



MUVE3D




OPENEXPOSER










Retrieved from "http://www.emboxit.net/mw/index.php?title=Resin_3D_printer&oldid=3141"