LED1
From emboxit
Motorola AN2475
Allegro ACS711 Hall Effect Linear Current Sensor
- Allegro ACS711 Hall Effect Linear Current Sensor with Overcurrent Fault Output for <100 V Isolation Applications product page datasheet to Digikey at $2.9@1pc $1.33@1000pcs
- ACS711 is SO8 it is the lowest cost device in the product family
- Sparkfun breakout board ACS712,
- Sparkfun breakout board ACS712 Low Current Sensor Breakout with op-amp at the output!
- OPA344 LOW POWER, SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS MicroAmplifier ™ Series Digikey at $1.61@1pc $0.7@2500pcs
- ACS712 5V only, 5,20,30A versions,
- ACS711 3-5V, 12.5 and 25A versions
- Do not use amplifier. Use lower Vref to ADC
STM TSC1021 High side current sense amplifier
- TSC1021 product page
- Data Sheet
The TSC1021 has been specifically designed to deal with automotive conditions: load-dump protection up to 60 V, reverse-battery protection up to -32 V, ESD protection up to 4 kV and internal filtering for EMI performance.
- Low current consumption: ICC max = 300 μA
- -40 to 125°C operating temperature range
- Internally fixed gain: 20 V/V, 50 V/V
- TSSOP-8 only
- At Digikey $2.38@1pc, $1.088@1000pcs